Modal

G34 SPECIAL FIXED CYCLE (BOLT HOLE CIRCLE)

YES

G34 will drill a circular pattern of a specified number of holes with a specified radius.

G35 SPECIAL FIXED CYCLE (LINE AT ANGLE)

YES

G35 will drill a linear pattern of a specified number of holes with a specified angle.

G36 SPECIAL FIXED CYCLE (ARC)

YES

G36 will drill a circular pattern of a specified number of holes starting at a specified angle in a specified radius.

G37 SPECIAL FIXED CYCLE (GRID)

YES

G37 will drill a pattern of a specified number of holes in both X and Y starting at a specified X and Y coordinates with specified spacing.

Other G code preparatory functions:

• · G43 TOOL LENGTH COMPENSATION

• · G44 TOOL LENGTH COMPENSATION CANCEL

• · G45 TOOL OFFSET INCREASE

• · G46 TOOL OFFSET DECREASE

• · G50 PROGRAMMED MIRROR IMAGE CANCEL

• · G51 PROGRAMMED MIRROR IMAGE ON

• · G52 LOCAL COORDINATE SETTING

• · G60 UNIDIRECTIONAL POSITIONING

• · G61 EXACT STOP CHECK MODE

• · G65 Macro Call (NON MODAL)

• · G66 Macro call (MODAL)